Opis
Use:
Screws should always be installed at the “crest” or top curve of the roof sheathing. At this point, the casing and the support structure must be pre-drilled and the appropriate screws fastened into the panel. The adapter plate must then be fixed between the two nuts.
|
1
|
l1
|
l2
|
l3
|
d1
|
d2
|
ds
|
p
|
s
|
e
|
SW
|
||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
M10
|
200
|
110
|
70
|
10
|
10
|
7
|
8,95
|
4,5
|
7
|
7,66
|
7
|
The role of the Modulfix awning screw for the installation of a solar system is to fix the rails holding the solar panels to the rafters of the roof, even on roofs with a typical wooden structure, such as corrugated, trapezoidal or slate roofs. The ace bolt also has a rubber seal to prevent the roof from leaking.
Thanks to their strong and durable design, they provide a long-lasting base for solar panels, resistant to the elements, made of stainless steel.
It is important to highlight the stability and long life of Modulfix anchor bolts and the assistance they provide in efficient solar installation, making them an excellent choice for installations.
Modulfix steel anchor bolts are an excellent choice for those looking to harness sustainable energy sources and save money. These anchor bolts allow for the safe and efficient installation of solar panels on roof structures, promoting environmentally friendly energy production.
The stainless steel anchor bolts are mounted on plate or slate roofs, to which the Modulfix mounting rails are attached, which can be connected with stainless steel hex head screws or Modulfix hammer head screws using the Modulfix adapter plate. The dissolvable joint is secured with a stainless steel serrated nut with flange. The aluminium rail can be either the 40×40 reinforced aluminium rail or the multi rail, which can be mounted from the bottom or the side.
Reviews
There are no reviews yet.